RF I/O SW922

特征/选项

  • 热塑性塑料外壳
  • sWave®无线技术
  • 不需要铺设线缆和管道
  • 通过锂电池供电
  • 接收器易于编程
  • 在接收器输出信号可单独配置
Notes
  • RF I/O可以与无线电感式传感器RF IS结合使用
  • 外部连接开关触点(无接触)需金触点。
  • 订购不包含保护盖。

技术参数

标准EN 60947-5-1; EN 61000-6-2, -6-3,
EN 61000-4-2, -4-20;
EN 301 489-1; EN 301 489-3;
EN 300 220-1; EN 300 220-2
外壳ABS (Acrylnitril-Butadien-Styrol)
连接方式4 x Plug-in connector M12 x 1, 4-pole
保护等级IP 67 符合 IEC/EN 60529
ProtocolsWave®
周围介质温度–20 °C … +65 °C
Switching frequencymax. 5 Hz
Standby current60 µA
Voltage supplyLithium battery Tadiran SL-760; system Li/SOCl2;
(replaceable)
Nominal voltage3.6 V
Capacity2.2 Ah
Frequency916.5 MHz (Japan)
Transmission power< 1 mW
Data rate66 kbps
Channel bandwidth400 kHz
Wireless rangemax. 150 m outside,
max. 20 m inside
Battery lifedepending on the switching frequency and number and type of sensors for 1000 transfers/day and one inductive sensor approx. 300 days; for 1000 transfers/day and one mechanical switch approx. 1400 days
Actuating timemin. 80 ms
认证 Japan: ARIB STD-T108: 204-610002
 
NoteTransmission of battery voltage; status signal: individually adjustable via jumper, no, 10 s, 100 s, 1000 s, 10 000 s
订货明细
Type   物料号
RF I/O SW922-4E-2,2Ah on request Produced to order.