技术文章

Wireless switching devices are not yet widespread within the oil & gas industry. And yet wireless technology offers this sector some particular advantages – provided that explosion protection is guaranteed.

Source: Chemie Technik (04/2022)

Wireless user interfaces have multiple benefits, making them a popular choice in many medical disciplines. However, they also involve a higher level of effort for device manufacturers with regard to testing and documentation than cabled controls – unless the supplier is MDR-ready and able to provide the user interface with all the relevant documentation.

Source: meditronic-journal (2/2022)

Nearly all customised user interfaces developed by steute Meditec in cooperation with medical device manufacturers communicate with the device in question via remote control. And wireless command devices are also becoming increasingly popular as standard user interfaces – with good reason.

Source: medical-design (02/2022)

Adverse ambient conditions must be taken into account during the development of switching devices for extreme applications, and must also be tested as first prototypes are produced.

Source: Verfahrenstechnik (04/2021)

In Löhne, situated in East Westphalia, the operating theatre of the future is already reality: foot switch specialist steute Technologies GmbH & Co. KG has developed a multi-purpose foot control which enables surgeons to operate different medical devices from different manufacturers.

Source: VDMA Magazin (11/2020)

Emco Wheaton loading systems are used all around the world for the handling of large quantities of petrol, natural gas, liquid gas, chemicals, etc. The company, which is based in Kirchhain near Marburg, monitors the positions of its loading arms using Ex position switches which are reliable in the long term, even in subzero temperatures.

Source: Technische Logistik (07-08/2020)

When selecting wireless networks for their industrial production, many factory planners favour open rather than proprietary networks. However: this apparent contradiction begins to blur, the closer one looks. A comparison of the two systems shows why.

Source: NET (6-7/2020)

Position switches used to monitor the step treads of part of the light railway system in the city of Bielefeld were increasingly failing, making higher levels of maintenance necessary. The operator MoBiel started looking for an alternative solution – and found one very close by. Following a successful test phase, the trains are now being successively fitted with long-life position switches.

Source: messtec drives Automation (04/2020)

Various steute switchgear series are currently being tested in real-life conditions on the island of Helgoland. The results are used to improve the development of new product series.

Source: konstruktionspraxis (03/2020)

A new series of emergency pull wire switches demonstrates the benefits of modular construction in electromechanical switchgear. This switchgear series can withstand extreme ambient conditions, can be used universally and is highly versatile with regard to installation, mounting and integration in existing equipment.

Source: Der Konstrukteur (7-8/2019)

Petrol, natural gas and liquid gas are typical products handled using loading systems manufactured by Emco Wheaton. These loading systems are frequently to be found at the end of a process chain, at production sites or logistics stations like fuel depots or, in "ship to shore" applications, at ports.

Source: Chemietechnik (6/2019)

At its Neuhof-Ellers site near Fulda, the company K+S Kali mines raw potash and magnesium salts at depths of down to 800 metres. The atmosphere in the flotation plants which separate the potassium chloride from the rock salt and other mineral salt constituent parts is extremely corrosive. Trust is therefore placed in "Extreme" emergency pull-wire switches which have been thoroughly tested and which allow the plants to be switched off very fast should a dangerous situation occur.

Source: Schüttgut (4/2019)